Which point is the Airflow Station 2 - 考试宝

单选题 Which point is the Airflow Station 2.5 in the engine?

A、 HP compressor discharge.

B、 HP compressor stage 5 stator.

C、 HP compressor inlet

下载APP答题

由4l***lb提供分享举报纠错

相关试题

单选题 What is the engine cowls open sequence on CF6-80 engine?

A、Fan cowl, core cowl then T/R halve.

B、T/R halve, fan cowl the core cowl.

C、Fan cowl, T/R halve then core cowl.

单选题 What transmit the loading in the forward engine mount

A、2 mount bolts and s shear oins.

B、4 mount bolt and 2 shear pins.

C、4 mount bolts and 1 shear pin.

单选题 Where are the engine mounts of CF6-80 engine?

A、Forward mount at the intermediate case and the rear mount at the rear frame.

B、Forward mount at the fan frame and the rear mount at the intermediate case.

C、Forward mount at the fan frame and the aft mount at the turbine rear frame.

单选题 How to adjust the tension of the fan cowl latch?

A、Rotate the latch eyebolt to adjust the tension.

B、Add the shim to adjust the tension of the latch.

C、Insert the hex wrench to rotate the adjustment star wheel.

单选题 The drain module

A、is mounted below the fan stator case and discharge accumulated fluid on ground.

B、is mounted below the fan stator case and discharge accumulated fluid in flight.

C、is mounted on the accessary gearbox and discharge accumulated fluid in flight.

单选题 How would you identify No.1 fan blade?

A、It algines to a white square on the spinner.

B、Locate the off-set spinner attach bolt and count 2 blades counter-clockwise, forward facing aft.

C、Locate the off-set spinner attach bolt and count 2 blades clock-wise, forward facing aft.

单选题 How many and where are the dynamometer installed during an engine change?

A、Four dynamometers with 2 on the front and 2 on the aft.

B、Three dynamometers with 2 on the front and one on the aft hoist O/B side.

C、Three dynamometers with 2 on the front and one on the aft hoist I/B side.

单选题 How many boroscope ports are provided for the combustion chamber?

A、15 boroscope ports round the 30 fuel nozzles

B、2 boroscope ports: B1-13 and B2-1

C、5 boroscope ports: B2-1 through B2-5