If you find a crack, do the applicab

单选题 If you find a crack, do the applicable repair procedure.

A、如果你发现了凹坑 , 做适用的维护程序 .

B、如果你发现了划痕 , 做具体的修理工作 .

C、如果你发现了裂纹 , 做适用的修理程序 .

查看答案

下载APP答题

由4l***wi提供分享举报纠错

相关试题

单选题地面慢车功率指满足飞机以最小推力在地面尽可能慢地运行，但足以保证发动机、发动机附件和飞机正常运行所需的发动机功率。

A、Ground Idle Power refers to the power required to run an engine on the ground, as slowly as possible, yet sufficient to ensure satisfactory engine, engine accessory, and airplane operation with a minimum of thrust.

B、Ground Idle Power refers to the power required to run an engine as slowly as appropriate on the ground while still ensuring satisfactory airplane operation with a maximum of thrust of engine and engine accessory.

C、For Ground Idle Power, it determines the minimum power necessary to initiate and maintain safe airplane operation, engine accessory function, and satisfactory engine performance while limiting the degree of thrust utilized.

查看答案

单选题封面题名应为《飞行员操作手册》或《飞行员操作手册及经联邦航空局批准的飞机飞行手册》。

A、The cover title shall be \"Pilot's Operating Handbook\" or \"Polit's Operating Handbook and FAA Approved Airplane Flight Manual.\"

B、The name of the book might be \"Pilot's Operating Handbook\" or \"FAA Approved Airplane Flight Manual.\"

C、The cover could be named as \"Pilot's Operation Instruction\" or \"Pilot's Operation Instruction and FAA Approved Airplane Flight Instruction.\"

查看答案

单选题发动机运行限制包括起飞功率限制、最大连续功率限制以及最大正常运行功率限制。

A、Engine Operating Limits include Limits for Take off Power, Maximum Continuous Power, and Maximum Cruising Power.

B、Engine Operating Limits include limits for Take off Thrust, Maximum Cruise Power, and Maximum Normal Operating Power.

C、Engine Operating Limits include limits for Take off Power, Maximum Continuous Power, and Maximum Normal Operating Power.

查看答案

单选题最大操作限制速度是指在正常飞行操作中不得故意超过的速度限制。 V用节表示， M用马赫数表示。

A、Maximum Limiting speed Unsticks is the speed restrain which will not be intentionally surpassed in typical flight operations. V is communicated in knots and M in Mach Number.

B、Maximum Restriction Speed is the fastest a plane can fly without breaking the rules in normal flight. The speed is measured in knots and Mach Number.

C、Maximum Operating Limit Speed is the speed limit that may not be deliberately exceeded in normal flight operations. V is expressed in knots and M in Mach Number.

查看答案

单选题在有座舱增压的飞机上，座舱空气的分配是由一系列管路实现的，管路连接到增压空气源遍及整个座舱。空气被引导到飞机飞机顶板的通风口并从那里释放出来 .

A、On pressurized aircraft, the cabin air is distributed with a system of air ducts leaded from the pressurization source into and throughout the cabin. Typically, air is ducted to and released from ceiling ventilation.

B、Distribution of cabin air on pressurized aircraft is managed with a system of air ducts leading from the pressurization source into and throughout the cabin. Typically, air is ducted to and released from ceiling vents.

C、On pressurized aircraft cabin air is distributed with a system of air ducts leaded from the pressurization source into and throughout the cabin. Typically, air is ducted to and released from ceiling flap.

查看答案

单选题在某些涡轮螺旋桨驱动的飞机上，状态杆是发动机启动和停车的主要控制装置。在其它类型的飞机上，状态杆主要用来控制设置发动机和螺旋桨速度。

A、On some turbopropeller powered airplanes, the condition lever is the primary control for starting and stopping the engine. On others, it is the primary control used to set engine and propeller speed.

B、On some piston powered airplanes, the condition lever is the secondary control for starting and shutting the engine. On others, it is the secondary control used to set engine and piston speed.

C、On some turbopropeller powered airplanes, the status lever is the secondary control for starting and shutting the engine. On others, it is the secondary control used to set engine and propeller speed.

查看答案

单选题 “加速-停止距离 ”是指飞机加速到某一特定速度，并假设刚获得该速度的瞬间一发失效，将飞机停止所需要的距离。

A、Accelerated Stopping Distance is the distance required to decelerate an aircraft to a particular speed and, assuming one of the engines fails at the instant that speed is reached, bring the aircraft to a stop

B、Accelerate -Stop Distance is the distance required to accelerate an airplane to a specified speed and, assuming failure of an engine at the instant that speed is attained, to bring the airplane to a stop.

C、Accelerate -Stop Distance is the distance required to accelerate an airplane to a required speed and, assuming failure of two engines alternatively when a speed is reached, to bring the airplane to a stop.

查看答案

单选题临界迎角是液体或气流从表面开始分离，导致流体效率降低的角度。临界迎角是设计空气动力学表面时的重要考虑因素，例如飞机机翼、涡轮叶片等，因为它决定着不会导致升力或推力损失的最大攻角大小。

A、Crucial angle of attack is the angle at which a stream or air flow begins to split from a surface,causing a decrease in efficiency. It is important for designing dynamic surfaces ,such as airplane wings,turbine blades,as it determines the maximum attack angle that can be achieved without causing loss of lift or thrust.

B、Crutial angle of attack is the angle at which a stream or air flow begins to seperate from a surface,causing a decrease in efficiency. It is important for designing aerodynamic surfaces ,such as airplane airfoils,turbine blades,as it determines the maximum attack angle that can be achieved without causing loss of lift or thrust.

C、Critical angle of attack is the angle at which a fluid or air flow begins to separate from a surface, causing a reduction in the efficiency of the flow. The critical attack angle is an important consideration in the design of aerodynamic surfaces, such as airplane wings, turbine blades, as it determines the maximum angle of attack that can be achieved without causing a loss of lift or propulsion.

查看答案