单选题 经批准的修理部分应包括进行修理所需的工艺和技术。

A、 The approved repair part must contain the skill and technology required to carry up the repair.
B、 The approved repair portion shall include processes and techniques necessary for performing a repair .
C、 The necessary workmanship and skills constitute the approval of the repair portion.
下载APP答题
由4l***hd提供 分享 举报 纠错

相关试题

单选题 分配系统用于引入和分配空气。

A、The distribution system is used to store and distribute air pressure.
B、Distribution system is used to induct and distribute air.
C、Air inlet system is used to distribute air to all systems.

单选题 该格式不应依赖于设备,如推力计算机。

A、The layout does not rely on devices that require power such as computers.
B、The format should not rely on devices such as a power computer.
C、The forms should be independent from any equipment, computers are suitable.

单选题 从支架上除去不需要的密封胶。

A、Remove unwanted support from sealant.
B、Wipe excess sealant from the lever.
C、Remove the unwanted sealant from the bracket.

单选题 引气口作动器安装在进气门内侧的后压力舱壁的后部。

A、The inlet door actuator is installed aft of the rear pressure bulkhead on the inner side of the air inlet door.
B、The air inlet actuator is mounted on the side of the pressure bulkhead behind the intake valve.
C、The air release actuator is located on top of the pressure bulkhead inside the intake valve.

单选题 确信每个电门下方的琥珀色的VALVE CLOSED灯熄灭。

A、Ensure you switch off the brown VALVE CLOSED light next to each switch.
B、Make sure the amber VALVE CLOSED light below each switch goes off.
C、The purple VALVE CLOSED light under each switch is confirmed off.

单选题 说明如何检查它们是否正常运行和如何识别故障。

A、Explain how to check them for proper operation and how to recognize a malfunction.
B、Describes how to check that they are functioning properly to identify faults.
C、Describes how to identify these failures so that these systems can function properly.

单选题 测试仪将自动运行测试。

A、The testing machine will run the tests in manual mode.
B、The test set will automatically run the tests.
C、The test apparatus will give the test parameter automatically.

单选题 为得到全部燃料装载量,初始飞机重量应该是最大允许重量。

A、For all fuel loadings, the initial airplane weight should be the maximum allowable.
B、The initial airplane weight should contain the maximum allowable for all fuel loads.
C、For all kinds of fuels, the initial aircraft weight should be the maximum allowable.