hpe7-A01_在线真题试卷与模拟练习_hpe7-A01_考试宝

更新时间：试题数量：购买人数：提供作者：

有效期：个月

章节介绍：共有个章节

收藏

我的练习

我的错题
(0道)

我的收藏
(0道)

我的斩题
(0道)

我的笔记
(0道)

专项练习

顺序练习 0 / 0

随机练习 自定义设置练习量

题型乱序 按导入顺序练习

模拟考试 仿真模拟

题型练习 按题型分类练习

易错题 精选高频易错题

学习资料 考试学习相关信息

搜索

题库预览

Which feature supported by SNMPv3 provides an advantage over SNMPv2c?

You are doing tests in your lab and with the following equipment specifications

AP1 has a radio that generates a 10 dBm signal

AP2 has a radio that generates a 11 dBm signal

AP1 has an antenna with a gain of 9 dBi

AP2 has an antenna with a gain of 12 dBi.

The antenna cable for AP1 has a 2 dB loss

The antenna cable for AP2 has a 3 dB loss

What would be the calculated Equivalent Isotropic Radiated Power (EIRP) for AP1?

With Aruba CX 6300，how do you configure ip address 10.10.10.1 for the interface in default state for interface 1？

A system engineer needs to preconfigure several Aruba CX 6300 switches that will be sent to a remote office An untrained local field technician will do the rollout of the switches and the mounting of several A5s and A5S. Cables running to the APs are not labeled. The VLANs are already name preconfigured to VLAN 100 (mgmt), VLAN 200 (clients), and VLAN 300 (guests) What is the correct configuration to ensure that APs will work properly?

Your Director of Security asks you to assign AOS-CX switch management roles to new employees based on their specific job requirements After the configuration was complete, it was noted that a user assigned with the administrators role did not have the appropriate level of access on the switch. The user was not limited to viewing nonsensitive configuration information and a level of 1 was not assigned to their role Which default management role should have been assigned for the user?

A new network design is being considered to minimize client latency in a high-density environment. The design needs to do this by eliminating contention overhead by dedicating subcarriers to clients. Which technology is the best match for this use case?

Your manufacturing client is having installers deploy seventy headless scanners and fifty IP cameras in their warehouse These new devices do not support 802 1X authentication. How can HPE Aruba reduce the IT administration overhead associated with this deployment while maintaining a secure environment using MPSK?

Which component is used by the Aruba Network Analytics Engine (NAE)?

You need to have different routing-table requirements with Aruba CX 6300 VSF configuration Assuming the correct layer-2 VLAN already exists how would you create a new OSPF configuration for a separate routing table?

With the Aruba CX switch configuration, what is the first-hop protocol feature that is used for VSX L3 gateway as per Aruba recommendation?

You are deploying a bonded 40 MHz wide channel What is the difference in the noise floor perceived by a client using this bonded channel as compared to an unbonded 20MHz wide channel?

When setting up an Aruba CX VSX pair, which information does the Inter-Switch Link Protocol configuration use in the configuration created?

What is true regarding 802.11k?

Your customer is interested in hearing more about how roles can help keep consistent policy enforcement in a distributed overlay fabric How would you explain this concept to them''

How is Multicast Transmission Optimization implemented in an HPE Aruba wireless network?

You are setting up a customer's 15 headless loT devices that do not support 802.1X. What should you use?

How do you allow a new VLAN 100 between VSX pair inter-switch-link 256 for port 1 and 2?

A large retail client is looking to generate a rich set of contextual data based on the location information of wireless clients in their stores Which standard uses Round Trip Time (RTT) and Fine Time Measurements (FTM) to calculate the distance a client is from an AP?

You need to create a keepalive network between two Aruba CX 8325 switches for VSX configuration. How should you establish the keepalive connection?

Which method is used to onboard a new UXI in an existing environment with 802 1X authentication? (The sensor has no cellular connection)

更多题库